- Course ListHow to book or participate
- Click on the desired course and log in. Pay with your Credit Card or PayPal and you are in the virtual class room.Allow 4 -5 minutes. Remember that you need a headset with a microphone or you can not talk to your trainer. For more detailed instructions click here.
- Click on the desired course and log in. Pay with your Credit Card or PayPal and you are in the virtual class room.Allow 4 -5 minutes. Remember that you need a headset with a microphone or you can not talk to your trainer. For more detailed instructions click here.
In this course you learn about: - Cost of accidents
- Type of accidents
- Near misses
- Risk assessments
- Most common accidents and how to prevent them
- How to deal with isocyanide
- Fires
- Your obligations
- Reviews
Target Audience: This course is designed for all staff in the Collision Industry.
It makes your staff aware of accident and health issues specifically to our industry and to change their attitude towards OH&S.
Date: 25.05.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1.5 hours, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - Looking after a clients car
- Pre-repair inspection
- Cleaning prior to repair
- Cleaning blood
- Dismantling prior to repair
- How to store parts
- Cleaning cars
- Preparing cars for delivery
- Review
Date: 08.07.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1.2 hours, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - Car development
- Car terminology
- Car frames and bodies
- Crumble zones and how they make a car safe
- Crash tests
- Review
Target Audience: This course is designed for apprentices.
Date: 01.07.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - Compressor types
- Installations
- Breathing air
- Air dryers
- Air hoses and repairs
- Safety issues
Target Audience: This course is designed for Panel Beater and Spray Painter apprentices. However, some trades people would also benefit from this course
Date: 27.05.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - Different welding methods
- Spot welding
- MIG welding
- MIG brazing
- Welding safety issues
- Review
Target Audience: This course is designed for apprentices. It is also suitable for trades people who would like to learn about the current thinking in regards to the new steels used in modern vehicles.
Date: 29.06.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn: - Estimates, layout and information
- Cost to run a business
- Type of damages
- Damage indicators
- Repair or replace issues
- Accessories
- SMART repairs
- Review
Target Audience: This course is designed for apprentices.
Date: 04.03.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn: - The art of working with sheet metal
- Rust repairs
- Rust in structural parts
- Rust treatments
- How to replace a door skin (without filler)
- Specific metal tools and equipment
Target Audience: This course is designed for apprentices.
Date: 01.06.2010
Time: 11:30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn: - Panel shapes
- Tools and equipment
- Roughing out
- Panel shrinking
- Body filler application
- Safety considerations
- How to create extra work for the spray painter
- Split repairs
- PDR (Paintless dent repairs)
- Review
Target Audience: This course is designed for apprentices.
Date: 06.07.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
.
In this course you learn about: - The two main plastic families
- Repair Thermoplastics
- Plastic welding
- Plastic adhesives
- Repair Thermosets
- Fibreglass
- Carbon fibre
- Repair SMC (Sheet Molded Compound)
- How to make body kits
Target Audience: This course is designed for Panel Beater and Spray Painter apprentices.
Date: 15.07.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - Panel alignment
- Mouldings
- Pinstrips and decals
Target Audience: This course is designed for Panel Beater and Spray Painter apprentices.
Date: TBA
Time: TBA
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - Types of damage
- Energy transfer
- Understanding kinks and creases
- Comparative measuring
- Measuring systems
- Jigs
Target Audience: This course is designed for Panel Beater apprentices.
Date: 20.07.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - Pulling equipment
- Pulling clamps
- Understanding impact
- Different pulls
- High strength steel
- Structural integrity
- Aluminium bodies
Target Audience: This course is designed for Panel Beater apprentices.
Date: 03.06.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - Removing panel
- Where to access repair information.
- Sectioning of panels
- Cut and shut
- How to section tailor welded blanks
- Adhesive bonded panels
- SMC replacement panels
Target Audience: This course is designed for Panel Beater apprentices.
Date: 08.06.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - What is rust
- Understanding why rust forms
- Corrosion due to dissimilar metals
- Rust proofing
- Sealers
- Foams
Target Audience: This course is designed for Panel Beater and Spray Painter apprentices.
Date: 13.07.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - Batteries and service
- New Electronic Features
- Adjusting headlights
- Hybrid Vehicles
Target Audience: This course is designed for Panel Beater apprentices. However, many trades people would also benefit from this course.
Date: 13.05.2010 and 15.06.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - Repairing Electrical cables
- Stray currents
- Trouble Shooting
- Multimeters
- Fiber optics
Target Audience: This course is designed for Panel Beater apprentices. However, many trades people would also benefit from this course.
Date: 18.05.2010 and 22.07.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - Airbags safety?
- Where to find airbags?
- How do airbags work?
- Airbag sensors and modules
- De-energising or disarming airbags
- Removing airbags
- Other restraint systems
- Why some airbags don’t go off?
- Airbag fraud
Target Audience: This course is designed for apprentices and trades people.
Date: 10.06.2010
Time: 11:30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price
In this course you learn about: - Spray booths
- Air flow
- Filters
- Paint curing systems
- Spray guns
- Solvent recyclers
Target Audience: This course is designed for Spray Painting apprentices.
Date: 17.06.2010
Time: 11.30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.- Spray booths
In this course you learn about: - Paint removal methods
- Sanding
- Paint stripper
- Sand blasting
- Masking
- Masking for primer
- Masking for top coat
- Cost of masking
- Blocking and sanding
- Blocking pattern
- DA sanding
Target Audience: This course is designed for Spray Painter apprentices.
Date: 27.07.2010
Time: 11:30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - Paints
- Paint codes
- Product information sheets or product data sheets
- Paint preparation
- Dust control
- Spray gun setup
- Paint application
- Painting plastics
- Clear over base and three layer pearls
- Blends
Target Audience: This course is designed for Spray Painters apprentices.
Date: 22.06.2010
Time: 11:30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - Can you see colours?
- What is colour
- Colour wheel
- How colours are sorted
- How light influences colour
- Metamerism
- How the brain can plays tricks
Target Audience: This course is designed for Spray Painter apprentices.
Date: 24.06.2010
Time: 11:30 am Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
In this course you learn about: - Wrinkling
- Blistering
- Air entrapment (craters)
- Bleeding
- Blushing
- Chalking
- Chipping
- Cracking
- Dust contamination
- Edge mapping
- Fisheyes
- Lifting
- Loss of gloss
- Mottling
- Orange peel
- Peeling
- Rail dust
- Runs/sags
- Sandscratches
- Shrinkage
- Soft film
- Solvent popping
- Staining/plastic bleed through
- Tape tracking
- Transparency
Target Audience: This course is designed for Spray painter apprentices.
Date: 29.07.2010
Time: 11:30 AM Academy time
Duration: The course is scheduled for 1 hour, but could vary depending on student’s participation.
This is a life course where you can speak to your trainer. If the scheduled time is not suitable, you can listen to the most recent recording, 24/7 for the same price.
